RGI    About Rogers Group Locations and Products Safety Culture Our Communities Industry Focus Career Opportunities Contact Us

Sandy Decorative Bottles

You will need:

sand

newspaper

colored chalk (as many different colors as you like)

see-through glass bottle

funnel
stick

white glue or bottle cap

any sort of board


Please have an adult's supervision for this activity.
This project is rated EASY to do.

1. Spread out the newspaper on your working surface.

2. Place some sand on the board.

3. Take any colored chalk and roll it in the sand, until the sand turns that color.

4. Put the funnel in the bottle.

5. Lift the board and empty the sand into the funnel.

6. Take the stick and make a few bumps in the sand.

7. Repeat steps 2-6, using a different color of sand each time, until the bottle is 1-2 cm ( 1/2 inch) less than full. If you are using a bottle cap be sure to fill the bottle to the top.

8. Press the sand down firmly, be careful not to move the bottle around or the sand will smudge.

9. If you are using the glue, pour it in to the remaining 1-2 cm (1/2 inch) of the bottle, and leave to dry. If you are using the bottle cap screw it on.

10. Tidy up!

This project was contributed by:
...Natalya Naqvi, I am 11 years old. I am a Pakistani but live in Singapore, with a mom a dad, a brother, a sister and a big fat cat named Cream Puff!!!!!!!!!





rock2road
Copyright Rogers Group, Inc. All Rights Reserved.
Email Rogers Group
Top
HOME